Address
E02 No.509 Floor 5 Unit3 Building1 No.1700 Tianfu Avenue North Section High-tech district Chengdu City Pilot Free Trade Zone China(Sichuan)
Work Hours
Monday to Friday: 9AM - 6PM
Weekend: 10AM - 5PM
Address
E02 No.509 Floor 5 Unit3 Building1 No.1700 Tianfu Avenue North Section High-tech district Chengdu City Pilot Free Trade Zone China(Sichuan)
Work Hours
Monday to Friday: 9AM - 6PM
Weekend: 10AM - 5PM
Many global sourcing customers raise the same question: why impurity control grades for sulfur hexafluoride (SF₆) under the GB/T framework can reach tighter limits than the baseline requirements of IEC 60376 and ASTM D2472? The core reason lies in the different positioning of each standard. Neither standard is inherently better; they simply cater to different application scenarios. IEC 60376:2018 and ASTM D2472 are general basic specifications for electrical switchgear. ASTM D2472 requires an SF₆ purity of ≥99.8 wt%, setting the minimum entry requirement to ensure basic insulation performance. The IEC standard sets a lower limit for pure SF₆ purity of >98.5 vol%, and most commercially available ordinary-grade SF₆ achieves 99.8 vol%–99.9 vol%, with relatively lenient limits for moisture, acidity, and fluorocarbon impurities.
Many global sourcing customers raise the same question: why impurity control grades for sulfur hexafluoride (SF₆) under the GB/T framework can reach tighter limits than the baseline requirements of IEC 60376 and ASTM D2472? The core reason lies in the different positioning of each standard. Neither standard is inherently better; they simply cater to different application scenarios. IEC 60376:2018 and ASTM D2472 are general basic specifications for electrical switchgear. ASTM D2472 requires an SF₆ purity of ≥99.8 wt%, setting the minimum entry requirement to ensure basic insulation performance. The IEC standard sets a lower limit for pure SF₆ purity of >98.5 vol%, and most commercially available ordinary-grade SF₆ achieves 99.8 vol%–99.9 vol%, with relatively lenient limits for moisture, acidity, and fluorocarbon impurities.
The GB/T series standards adopt a tiered control approach, covering the complete gradient from industrial grade to ultra-high purity electronic grade: GB/T 12022 “Industrial Sulfur Hexafluoride”: Type I purity ≥99.9 wt%, Type II purity ≥99.99 wt%, with stringent quantitative limits set for indicators such as total oxygen + nitrogen, CF₄, C₂F₆, C₃F₈, moisture, hydrolyzable fluorides, and mineral oil; GB/T 18867 “Electronic Gas Sulfur Hexafluoride”: the 2014 edition sets a benchmark purity ≥99.999 vol% (5N), while the 2025 updated version raises the benchmark to ≥99.9995 vol% (5.5N). We supply ultra-high purity grades including 99.9995% and 99.9999% for electronic applications; 99.995% is our high-end industrial grade. These grades are suitable for high-end scenarios such as semiconductor etching, plasma processes, and precision calibration.
Quick Selection and Differentiation:
✅ IEC / ASTM standards: electrical insulation basic threshold, suitable for general power distribution equipment and routine maintenance and gas replacement scenarios;
✅ GB/T High Industrial Grade & Electronic Grade: Suitable for applications highly sensitive to trace impurities, including high-voltage/ultra-high-voltage GIS, long-cycle continuous operation equipment, and semiconductor production lines. Accumulation of trace impurities can easily induce partial discharge and accelerate the aging of seals in power equipment; in semiconductor production lines, it can cause fluctuations in process yields.
A common misconception in procurement is that some requests only specify “sulfur hexafluoride” without clearly defining the applicable standards and a complete set of impurity indicators. While products meeting basic IEC standards may have an initial cost advantage, in core power equipment and advanced manufacturing scenarios, lax impurity control can amplify long-term operational risks. Furthermore, with the continued tightening of global regulations on fluorinated greenhouse gases, low-quality gases will further increase the overall costs of subsequent gas reclamation and destruction.
Procurement and Selection Reference Suggestions
▸ For general power distribution and routine replacement scenarios: select the IEC 60376 basic specification, focusing on the two key indicators of moisture and acidity;
▸ High-voltage/Ultra-high-voltage GIS, long-life power equipment: GB/T 12022 Type II (99.99 wt%) is preferred, with stricter impurity control;
▸ Semiconductor, plasma etching, and standard calibration gases: electronic-grade sulfur hexafluoride, purity 99.9995 vol% / 99.9999 vol%;
▸ Contract drafting tips: Be sure to specify the complete execution standards and the accompanying impurity analysis table; do not just indicate the purity value.
Chengdu Xenon Tritium Technology Co., Ltd. supplies high-end industrial and ultra-high purity electronic sulfur hexafluoride (SF₆): 99.995 wt%, 99.9995 vol%, and 99.9999 vol%. Packaging specifications: 40L / 50kg steel cylinders, fitted with CGA590 (for export). QF-2 valves are available upon special request. A Certificate of Analysis (COA) is provided with each batch. We support custom orders according to customer requirements, and we can produce goods compliant with IEC, ASTM, or GB/T standards as required.
Disclaimer: The content of this article is for technology selection reference only. The technical specifications of the general contractor or end owner may be higher than publicly accepted standards, and the final acceptance criteria shall be based on the official project documents.
| Specification | 99.995% |
|---|---|
| Air | ≤ 10 ppm |
| Carbon Tetrafluoride | ≤ 2 ppm |
| Hexafluoroethane | ≤ 20 ppm |
| Octafluoropropane | ≤ 5 ppm |
| Low Sulfide | Not Detected |
| Moisture | ≤ 1 ppm |
| Acidity as HF | ≤ 0.1 ppm |
| Hydrolysable Fluorides as HF | ≤ 0.3 ppm |
| Mineral Oil | ≤ 1 ppm |
| Specification | 99.999% |
|---|---|
| Oxygen + Argon | ≤ 1 ppm |
| Nitrogen | ≤ 2 ppm |
| Methane | ≤ 0.1 ppm |
| Carbon Monoxide | ≤ 0.5 ppm |
| Carbon Tetrafluoride | ≤ 0.5 ppm |
| Carbon Dioxide | ≤ 0.5 ppm |
| Moisture | ≤ 3 ppm |
| Acidity as HF | ≤ 0.1 ppm |
| Hydrolysable Fluorides as HF | ≤ 0.8 ppm |
Please contact us if you have other purity or grade requirements.
